Fiber Ürünler

 

KABLO AÇIKLAMA ÜRÜN KODU
1m (3ft) MTP®-12 (Female) to MTP®-12 (Female) OM4 Multimode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Magenta 12FMTPOM4-LL
5m (16ft) MTP®-12 (Female) to MTP®-12 (Female) OM4 Multimode Elite Trunk Cable, 12 Fibers, Type A, Plenum (OFNP), Magenta 12FMTPOM4-LL
1m (3ft) MTP®-12 (Female) to MTP®-12 (Female) OS2 Single Mode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Yellow 12FMTPSMF-LL
5m (16ft) MTP®-12 (Female) to MTP®-12 (Female) OS2 Single Mode Elite Trunk Cable, 12 Fibers, Type A, Plenum (OFNP), Yellow 12FMTPSMF-LL
1m (3ft) MTP®- 24 (Female) to MTP®- 24 (Female) OM4 Multimode Elite Trunk Cable, 24 Fibers, Type A, Plenum (OFNP), Magenta  24FMTPOM4-LL
3m (10ft) MTP®-12 (Male) to MTP®-12 (Female) OM4 Multimode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Magenta 12FMTPOM4-LL
1m (3ft) MTP®- 24 (Female) to MTP®- 24 (Female) OS2 Single Mode Elite Trunk Cable, 24 Fibers, Type A, Plenum (OFNP), Yellow 24FMTPSMF-LL
1m (3ft) MTP®-12 (Female) to MTP®-12 (Female) OM3 Multimode Elite Trunk Cable (Color-coded), 12 Fibers, Type B, Plenum (OFNP), Aqua 12FMTPOM3
-LL
5m (16ft) MTP®-12 (Female) to MTP®-12 (Female) OM3 Multimode Elite Trunk Cable (Color-coded), 12 Fibers, Type A, Plenum (OFNP), Aqua 12FMTPOM3-LL
1m (3ft) MTP®-8 (Female) to MTP®-8 (Female) OM4 Multimode Elite Trunk Cable (Color-coded), 8 Fibers, Type B, Plenum (OFNP), Magenta  8FMTPOM4-LL
1m (3ft) MTP®-16 APC (Female) to MTP®-16 APC (Female) OS2 Single Mode Standard IL Trunk Cable, 16 Fibers, Plenum (OFNP), Yellow, for 800G Network Connection 16FMTPSMF-LL
5m (16ft) MTP®-12 (Female) to MTP®-12 (Female) OM4 Multimode Elite Trunk Cable (Color-coded), 12 Fibers, Type A, Plenum (OFNP), Magenta 12FMTPOM4-LL
1m (3ft) MTP®-12 (Female) to MTP®-12 (Female) OM4 Multimode Elite Trunk Cable (Color-coded), 12 Fibers, Type B, Plenum (OFNP), Magenta 12FMTPOM4-LL
1m (3ft) MTP®-8 (Female) to MTP®-8 (Female) OS2 Single Mode Elite Trunk Cable (Color-coded), 8 Fibers, Type B, Plenum (OFNP), Yellow 8FMTPSMF-LL
5m (16ft) MTP®- 24 (Female) to MTP®- 24 (Female) OM4 Multimode Elite Trunk Cable (Color-coded), 24 Fibers, Type A, Plenum (OFNP), Magenta 24FMTPOM4-LL
5m (16ft) MTP®-24 (Female) to MTP®-24 (Female) OM3 Multimode Elite Trunk Cable (Color-coded), 24 Fibers, Type A, Plenum (OFNP), Aqua 24FMTPOM3-LL
1m (3ft) MTP®-8 (Female) to MTP®-8 (Female) OM3 Multimode Elite Trunk Cable (Color-coded), 8 Fibers, Type B, Plenum (OFNP), Aqua 8FMTPOM3-LL
1m (3ft) MTP®-16 APC (Female) to MTP®-16 APC (Female) OM4 Multimode Elite Trunk Cable (Color-coded), 16 Fibers, Plenum (OFNP), Magenta, for 400G Network Connection  16FMTPOM4-LL
1m (3ft) MTP® Female to 4 LC UPC Duplex 8 Fibers Type B Plenum (OFNP) OS2 9/125 Single Mode Elite Breakout Cable, Yellow 8FMTPLCSMF-LL
1m (3ft) MTP® Female to 4 LC UPC Duplex 8 Fibers Type B Plenum (OFNP) OM4 50/125 Multimode Elite Breakout Cable, Magenta  8FMTPLCOM4-LL
1m (3ft) MTP® Female to 4 LC UPC Duplex 8 Fibers Type B Plenum (OFNP) OM3 50/125 Multimode Elite Breakout Cable (Color-coded), Aqua 8FMTPLCOM3-LL
1m (3ft) MTP® Female to 4 LC UPC Duplex 8 Fibers Type B Plenum (OFNP) OM4 50/125 Multimode Elite Breakout Cable (Color-coded), Magenta 8FMTPLCOM4-LL
1m (3ft) MTP® Female to 4 MDC UPC Duplex 8 Fibers Type B Plenum (OFNP) OS2 9/125 Single Mode Elite Breakout Cable, Yellow  8FMTPMDCSMF-LL
1m (3ft) MTP®-16 APC (Female) to 8 LC UPC Duplex OS2 Single Mode Standard IL Breakout Cable, 16 Fibers, Plenum (OFNP), Yellow, for 800G Network Connection 16FMTPLCSMF-LL
1m (3ft) MTP®-16 APC (Female) to 8 LC UPC Duplex OM4 Multimode Elite Breakout Cable (Color-coded), 16 Fibers, Plenum (OFNP), Magenta 16FMTPLCOM4-LL
1m (3ft) MTP®-16 APC (Female) to 8 LC UPC Duplex OM4 Multimode Elite Breakout Cable, 16 Fibers, Plenum (OFNP), Magenta 16FMTPLCOM4-LL
2m (7ft) MTP® PRO-12 (Male) to MTP® PRO-12 (Male) OM4 Multimode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Magenta 12FMTPPROOM4-LL
2m (7ft) MTP® PRO-12 (Male) to MTP® PRO-12 (Male) OS2 Single Mode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Yellow 12FMTPPROOS2-LL
1m (3ft) LC UPC to LC UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCDX-LL
1m (3ft) SC APC to SC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable  SMSCSX-LL
1m (3ft) LC UPC to LC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSX-LL
1m (3ft) LC UPC to SC UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCDX-LL
1m (3ft) LC UPC to SC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCSX
-LL
1m (3ft) LC APC to SC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCSX
-LL
1m (3ft) SC UPC to SC UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMSCDX-LL
1m (3ft) LC UPC to SC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCSX-LL
1m (3ft) LC APC to LC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSX-LL
1m (3ft) SC UPC to SC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable  SMSCSX-LL
1m (3ft) SC UPC to SC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMSCSX-LL
1m (3ft) LC UPC to SC APC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCDX-LL
1m (3ft) SC APC to SC APC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMSCDX-LL
2m (7ft) LC UPC to LC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSX-LL
1m (3ft) LC APC to LC APC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCDX-LL
1m (3ft) LC UPC to LC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSX-LL
1m (3ft) LC APC to SC APC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCDX-LL
2m (7ft) LC UPC to LC UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm G.657.A2 Fiber Optic Patch Cable SMLCDX-LL
15m (49ft) SC UPC to SC UPC Duplex 3.0mm PVC (OFNR) 9/125 Single Mode Fiber Patch Cable  SMSCDX-LL
2m (7ft) LC UPC to LC APC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCDX-LL
1m (3ft) LC APC to SC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSCSX-LL
1m (3ft) LC UPC to LC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm G.657.A2 Fiber Optic Patch Cable SMLCSX-LL
1m (3ft) US Conec MDC UPC to MDC UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable, for 200/400G Network Connection HD-SMUMDCDX-LL
1m (3ft) US Conec MDC UPC to LC UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable, for 200/400G Network Connection HD-SMUMDCLCDX-LL
1m (3ft) Senko SN UPC to Flat Clip LC UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 1.6mm Fiber Optic Patch Cable, for 400G Network Connection HD-SMUSNFULCDX-LL
1m (3ft) Senko SN UPC to SN UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 1.6mm Fiber Optic Patch Cable, for 400G Network Connection HD-SMUSNDX-LL
1m (3ft) LC UPC to ST UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSTDX-LL
1m (3ft) LC UPC to FC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCFCSX-LL
1m (3ft) LC UPC to ST UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable  SMLCSTSX-LL
1m (3ft) ST UPC to ST UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMSTDX-LL
1m (3ft) LC UPC to LC UPC Flat Clip Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-SMFULCDX-LL
1m (3ft) FC UPC to FC UPC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMFCSX-LL
1m (3ft) SC UPC to ST UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMSCSTDX-LL
1m (3ft) Grade B LC UPC to LC UPC Duplex Typical 0.12dB IL OS2 Single Mode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-SMLCDX-LL
1m (3ft) LC UPC to LC UPC Short Boot Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSSX-LL
1m (3ft) LC UPC to LC UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-SMULCDX-LL
1m (3ft) LC UPC to LC UPC Short Boot Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable SMLCSDX-LL
2m (7ft) LC UPC to LC UPC Switchable Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable HD-SMSULCDX-LL
1m (3ft) Senko CS™ UPC to CS™ UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable, for 200/400G Network Connection HD-SMUCSDX-LL
1m (3ft) Senko CS™ UPC to LC UPC Flat Clip Uniboot Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable, for 200/400G Network Connection HD-SMUCSULCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM5 Multimode Wideband PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM5LCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM4 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM4LCDX-LL
1m (3ft) LC UPC to LC UPC Flat Clip Uniboot Duplex OM4 Multimode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-OM4FULCDX-LL
1m (3ft) LC UPC to LC UPC Short Boot Duplex OM4 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM4LCSDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM4 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable (Color-coded), Magenta OM4LCDX-LL
1m (3ft) LC UPC to SC UPC Duplex OM4 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM4LCSCDX-LL
1m (3ft) LC UPC to LC UPC Duplex 0.15dB IL OM4 Multimode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-OM4LCDX-LL
1m (3ft) LC UPC to LC UPC Uniboot Duplex OM4 Multimode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-OM4ULCDX-LL
1m (3ft) LC UPC to LC UPC Switchable Uniboot Duplex OM4 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable HD-OM4SULCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM3LCDX-LL
1m (3ft) LC UPC to LC UPC Short Boot Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM3LCSDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable (Color-coded), Aqua OM3LCDX-LL
1m (3ft) LC UPC to SC UPC Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM3LCSCDX-LL
1m (3ft) LC UPC to LC UPC Uniboot Duplex OM3 Multimode PVC (OFNR) 2.0mm BIF Fiber Optic Patch Cable HD-OM3ULCDX-LL
3m (10ft) LC UPC to LC UPC Switchable Uniboot Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable HD-OM3SULCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1LCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM2 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM2LCDX-LL
1m (3ft) LC UPC to ST UPC Duplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1LCSTDX-LL
1m (3ft) LC UPC to SC UPC Duplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1LCSCDX-LL
1m (3ft) LC UPC to SC UPC Duplex OM2 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM2LCSCDX-LL
1m (3ft) LC UPC to ST UPC Duplex OM2 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM2LCSTDX-LL
1m (3ft) SC UPC to SC UPC Duplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1SCDX-LL
1m (3ft) LC UPC to LC UPC Simplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1LCSX-LL
1m (3ft) SC UPC to SC UPC Duplex OM2 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM2SCDX-LL
1m (3ft) SC UPC to SC UPC Simplex OM1 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable OM1SCSX-LL
2m (7ft) LC UPC to LC UPC Duplex OM3 Multimode Indoor Armored PVC (OFNR) 3.0mm Fiber Optic Patch Cable AM-OM3LCDX-LL
1m (3ft) SC APC to SC APC Simplex OS2 Single Mode Indoor Armored PVC (OFNR) 3.0mm Fiber Optic Patch Cable AM-OS2SCSX-LL
1m (3ft) LC UPC to LC UPC Duplex OS2 Single Mode Indoor Armored PVC (OFNR) 3.0mm Fiber Optic Patch Cable AM-OS2LCDX-LL
1m (3ft) LC UPC to LC UPC Duplex OM4 Multimode Indoor Armored PVC (OFNR) 3.0mm Fiber Optic Patch Cable AM-OM4LCDX-LL
2m (7ft) SC UPC to SC UPC Duplex OM4 Multimode Armored PVC (OFNR) 3.0mm Fiber Optic Patch Cable AM-OM4SCDX-LL
10m (33ft) LC UPC to LC UPC Duplex OS2 Single Mode Industrial/Military-Grade Armored Fiber Optic Patch Cable MG-OS2LCDX-LL
Portable Field Deployable Tactical Fiber Optic Cable Reel PTOA-FS-LL
1m (3ft) LC UPC to LC UPC Duplex OS2 Single Mode 7.0mm LSZH FTTA Outdoor Fiber Patch Cable for Base Station FTTA-OS2LCDX-LL
3m (10ft) LC UPC to SC UPC Duplex OS2 Single Mode 7.0mm LSZH FTTA Outdoor Fiber Patch Cable for Base Station  FTTA-OS2LCSCDX-LL
3m (10ft) LC UPC to LC UPC Simplex OS2 Single Mode 7.0mm LSZH FTTA Outdoor Fiber Patch Cable for Base Station FTTA-OS2LCSX-LL
1m (3ft) LC to ST OM1 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-ST-OM1-1M-LL
1m (3ft) LC to LC OM1 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-LC-OM1-1M-LL
1m (3ft) LC to SC OM1 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-SC-OM1-1M-LL
1m (3ft) LC to SC OM2 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-SC-OM2-1M-LL
1m (3ft) LC to ST OM2 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-ST-OM2-1M-LL
1m (3ft) LC to LC OM2 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-LCE-LC-OM2-1M-LL
1m (3ft) SC to SC OM1 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-SCE-SC-OM1-1M-LL
1m (3ft) SC to SC OM2 Mode Conditioning PVC (OFNR) Fiber Optic Patch Cable MC-SCE-SC-OM2-1M-LL
1m (3ft) LC UPC 12 Fibers OS2 Single Mode Unjacketed Color-Coded Fiber Optic Pigtail  FS12SM-LCU-CP-1M-PVC
-LL
1m (3ft) SC UPC 12 Fibers OS2 Single Mode Unjacketed Color-Coded Fiber Optic Pigtail FS12SM-SCU-CP-1M-PVC-LL
1m (3ft) SC APC 12 Fibers OS2 Single Mode Unjacketed Color-Coded Fiber Optic Pigtail FS12SM-SCA-CP-1M-PVC
-LL
1m (3ft) LC APC 12 Fibers OS2 Single Mode Unjacketed Color-Coded Fiber Optic Pigtail FS12SM-LCA-CP-1M-PVC-LL
1.5m (5ft) LC UPC 12 Fibers OM3 Multimode Bunch PVC (OFNR) 0.9mm Fiber Optic Pigtail  FS12OM3-LCU-BP-1.5M-PVC-LL
1.5m (5ft) SC UPC 12 Fibers OS2 Single Mode Bunch PVC (OFNR) 0.9mm Fiber Optic Pigtail  FS12SM-SCU-BP-1.5M-PVC-LL
1.5m (5ft) LC UPC 12 Fibers OM4 Multimode Bunch PVC (OFNR) 0.9mm Fiber Optic Pigtail  FS12OM4-LCU-BP-1.5M-PVC-LL
1.5m (5ft) SC APC 12 Fibers OS2 Single Mode Bunch PVC (OFNR) 0.9mm Fiber Optic Pigtail FS12SM-SCA-BP-1.5M-PVC-LL
1.5m (5ft) LC APC 12 Fibers OS2 Single Mode Bunch PVC (OFNR) 0.9mm Fiber Optic Pigtail FS12SM-LCA-BP-1.5M-PVC
-LL
1m (3ft) SC APC Simplex OS2 Single Mode PVC (OFNR) 0.9mm Fiber Optic Pigtail  FSSM-SCA-FP-1M-PVC
-LL
1m (3ft) LC UPC Simplex OS2 Single Mode PVC (OFNR) 0.9mm Fiber Optic Pigtail FSSM-LCU-FP-1M-PVC
-LL
1m (3ft) SC UPC Simplex OS2 Single Mode PVC (OFNR) 0.9mm Fiber Optic Pigtail FSSM-SCU-FP-1M-PVC
-LL
1m (3ft) LC UPC Simplex OM3 Multimode PVC (OFNR) 0.9mm Fiber Optic Pigtail FSOM3-LCU-FP-1M-PVC
-LL
1m (3ft) LC APC Simplex OS2 Single Mode PVC (OFNR) 0.9mm Fiber Optic Pigtail FSSM-LCA-FP-1M-PVC
-LL
1m (3ft) SC UPC Simplex OM3 Multimode PVC (OFNR) 0.9mm Fiber Optic Pigtail FSOM3-SCU-FP-1M-PVC-LL

 

ÜRÜN KODU MEDIA CONVERTER AÇIKLAMA
LNGMC-110GMA-11-05-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GMA-11-2-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-10-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-20-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-40-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-60-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-80-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-10A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-20A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-40A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-60A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110-SFP  This series converters are designed to meet the massive needs for Gigabit network deployment and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 80KM.

This series converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a Standard Converter Chassis. The installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

Features:

1000Base-T to 1000BASE-SX/LX Converter
Standard : IEEE 802.3z & 802.3ab
Interface: 1 x RJ-45 connector / 1 x SFP Slot
MDI/MDIX Auto-Crossover supported
LED: Power , DUP,FP-LINK,RX,1000,TX
Plug-and-Play installation
Support Jumbo Frame (64-9216 Byte)
Support Voltage Monitor

LNGMC-110G-SFP  This series converters are designed to meet the massive needs for Gigabit network deployment and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 80KM.

This series converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a Standard Converter Chassis. The installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

Features:

1000Base-T to 1000BASE-SX/LX Converter
Standard : IEEE 802.3z & 802.3ab
Interface: 1 x RJ-45 connector / 1 x SFP Slot
MDI/MDIX Auto-Crossover supported
LED: Power , DUP,FP-LINK,RX,1000,TX
Plug-and-Play installation
Support Jumbo Frame (64-9216 Byte)
Support Voltage Monitor

LNGMC-110G-SFP-AS  This series converters are designed to meet the massive needs for Gigabit network deployment and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 80KM.

This series converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a Standard Converter Chassis. The installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

Features:

1000Base-T to 1000BASE-SX/LX Converter
Standard : IEEE 802.3z & 802.3ab
Interface: 1 x RJ-45 connector / 1 x SFP Slot
MDI/MDIX Auto-Crossover supported
LED: Power , DUP,FP-LINK,RX,1000,TX
Plug-and-Play installation
Support Jumbo Frame (64-9216 Byte)
Support Voltage Monitor

LNGMC-YT-1000M GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-1/7-2A (1). Contents of system
The main contents of managed system is listed below :
1.Net manageable module
It is the key-unit of the system , used to collect the relational information from the media converters installed in the chassis , and manage the functions of media converters . It has one general 10/100M RJ45 port and one general RS232 console port .
2.Full range of Wintop manageable media converters or other manageable cards.
3.17 slots rack-mounted chassis
19 inch 1U rack-mount chassis , with 17 slots ,can support 1 pc Net manageable module and 16 pcs manageable media converters . Normally it will be installed in center ,so that the user can manage it easily . It has dual power supply ,support NMS function .The fans can be managed .
4.Manageable stand-alone media converters in remote end .

(2). Manageable functions over view
wView manageable system supports full range of standards such as HTTP,SNMP,TFTP,TELNET …etc .The system has proper interface for each .

1.Support WEB based management
Our manageable system supports the management based on WEB .  It is easy to be understood and used ,no need install special software , so that it is easier for the users .
2.Support SNMP management
Fully support SNMP , the users can manage the relational devices via any operating system , such as HP-OpenView .
3.Support Console management when emergency
Support local command-string management via Console port , the users can manage the devices via other networks such as Telephone System , in case the Ethernet networks failed .
4.Support TELNET
5.The software can be upgraded online via TFTP.

LNGMC-110-XXXX-M (1). Contents of system
The main contents of managed system is listed below :
1.Net manageable module
It is the key-unit of the system , used to collect the relational information from the media converters installed in the chassis , and manage the functions of media converters . It has one general 10/100M RJ45 port and one general RS232 console port .
2.Full range of Wintop manageable media converters or other manageable cards.
3.17 slots rack-mounted chassis
19 inch 1U rack-mount chassis , with 17 slots ,can support 1 pc Net manageable module and 16 pcs manageable media converters . Normally it will be installed in center ,so that the user can manage it easily . It has dual power supply ,support NMS function .The fans can be managed .
4.Manageable stand-alone media converters in remote end .

(2). Manageable functions over view
wView manageable system supports full range of standards such as HTTP,SNMP,TFTP,TELNET …etc .The system has proper interface for each .

1.Support WEB based management
Our manageable system supports the management based on WEB .  It is easy to be understood and used ,no need install special software , so that it is easier for the users .
2.Support SNMP management
Fully support SNMP , the users can manage the relational devices via any operating system , such as HP-OpenView .
3.Support Console management when emergency
Support local command-string management via Console port , the users can manage the devices via other networks such as Telephone System , in case the Ethernet networks failed .
4.Support TELNET
5.The software can be upgraded online via TFTP.

LNGMC-M100 (1). Contents of system
The main contents of managed system is listed below :
1.Net manageable module
It is the key-unit of the system , used to collect the relational information from the media converters installed in the chassis , and manage the functions of media converters . It has one general 10/100M RJ45 port and one general RS232 console port .
2.Full range of Wintop manageable media converters or other manageable cards.
3.17 slots rack-mounted chassis
19 inch 1U rack-mount chassis , with 17 slots ,can support 1 pc Net manageable module and 16 pcs manageable media converters . Normally it will be installed in center ,so that the user can manage it easily . It has dual power supply ,support NMS function .The fans can be managed .
4.Manageable stand-alone media converters in remote end .

(2). Manageable functions over view
wView manageable system supports full range of standards such as HTTP,SNMP,TFTP,TELNET …etc .The system has proper interface for each .

1.Support WEB based management
Our manageable system supports the management based on WEB .  It is easy to be understood and used ,no need install special software , so that it is easier for the users .
2.Support SNMP management
Fully support SNMP , the users can manage the relational devices via any operating system , such as HP-OpenView .
3.Support Console management when emergency
Support local command-string management via Console port , the users can manage the devices via other networks such as Telephone System , in case the Ethernet networks failed .
4.Support TELNET
5.The software can be upgraded online via TFTP.

LNGMC-10110
LNGMC-1/4-2A We have two types of rack-mounted chassis for unmanaged media converters :
2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis .

The 14 slots media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters.

The 16 slots media converter chassis media converter chassis should be used with card-type media converters .
The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M .

LNGMC-1/6-2A We have two types of rack-mounted chassis for unmanaged media converters :
2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis .

The 14 slots media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters.

The 16 slots media converter chassis media converter chassis should be used with card-type media converters .
The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M .

LNGMC-1-2U We have two types of rack-mounted chassis for unmanaged media converters :
2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis .

The 14 slots media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters.

The 16 slots media converter chassis media converter chassis should be used with card-type media converters .
The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M .

LNGMC-1-4U We have two types of rack-mounted chassis for unmanaged media converters :
2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis .

The 14 slots media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters.

The 16 slots media converter chassis media converter chassis should be used with card-type media converters .
The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M .

LNGMC-110MA-11-2 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-20 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-40 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-60 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-80 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-100 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-11-120 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-20A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-20B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-40A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-40B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-60A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-60B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-80A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-11-80B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110MA-12-2 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-20 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-40 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-60 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-80 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-100 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-12-120 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-20A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-20B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-40A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-40B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-60A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-60B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-80A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-12-80B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110MA-14-2 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-20 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-40 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-60 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-80 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-100 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SA-14-120 GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-20A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-20B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-40A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-40B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-60A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-60B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-80A GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-110SB-14-80B GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-YT-81/4-2A PRODUCT OVERVIEW

We have two types of rack-mounted chassis for unmanaged media converters : 2-U 14 slots media converter chassis.The 14 slots media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters.

SPECIFICATIONS

Number of slots :14 ;

Media converters adapted :

14 slots chassis : 10/100M or 1000M or 10/100/1000M stand-alone media converters

Material: aluminium alloy or steel

Power in :AC90 V~230 V ; OR DC 48V

Power out :DC 5V , 12A

Diameter of DC plug :2.5/5.5 mm

Max Power Consumption:120W

Ripple≤50 Mv

Noise :≤50 Mv

Protection of power supply :circuit-breaker when overvoltage ;circuit-breaker when

overflow ;circuit-breaker  when short circuit

Operating Temperature :-10℃~50℃

Storage Temperature:-20℃~85℃

Humidity: 5%~95%

Dimensions:L485 ,W231,H90 mm   ;19 inches  2U

LNGMC-YT-10/100M GENERAL DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance to several kilometer or hundred kilometer.
Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:
–Pass all packets without address and CRC check (optional);
–Supports modified cut-through frame forwarding for low latency;
–Supports pure converter mode data forwarding for extreme low latency;
–Supports flow control for full and halt duplex operation;
–Bandwidth control;
–Forward 1600 bytes packet for management;
–Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD

LNGMC-MANUEL  1. Overview

10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as 10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19” converter rack Chassis for use at a central wiring closet.

2. Technical Specifications

Standards

1000Base-T,  2.5GBase-T, 5Gbase-T, 10Gbase-T
1000Base-X, 2500Base-X,  5GBase-R , 10GBase-R

Media Supported

1000Base-T: Cat5 UTP/STP. MAX 100m;

2.5GBase-T: Cat5e UTP/STP. MAX 50m;

5GBase-T: Cat5e UTP/STP. MAX 50m;

10G Base-T: Cat6a UTP/STP. MAX 50m;

Port Type

RJ45,  SFP Slot

Work Mode

1000Base-T  to  1000Base-X
2.5GBase-T  to  2500Base-X

5Gbase-T    to  5GBase-R

10Gbase-T   to  10GBase-R

Power Supply

12V DC

Power
consumption

MAX 5W

Operation Tempera tore

0℃ to 55℃

Relative Humidity

5% to 80% (non-condensation)

3. Installing the Converter

For as a standalone unit:
→ Verify the DC adapter conforms to your country DC power requirement and insert the power plug
→ Connect the media cable for network connection
For as a slide-in unit:
→ The slide-in Media Converter and Converter Rack Chassis should supplied only from the same source, both Media Converter Rack Chassis are built to match each other at dimension, DC jack, DC receptacle and power safety.
→ Turn off the 19” converter rack power
→ Locate +12V DC power jack on converter back, carefully slide in and plug to 19” rack +12V DC power receptacle
→ Connect the media cable for network connection
→ Turn on the converter rack power, the Power LED will light up

LNGMC-F2F-WXFP Products properties

Interface
Type A : XFP to XFP
Type B : XFP to SFP+
Type C : SFP+ to XFP
Type D: SFP+ to SFP+
LED Indicator:PWR,SPD, LOS1, LOL2,LOS2, LOL2
Maximum Packet Forwarding Rate
14,880,950/S
Transmission Speed
8.5Gb/s-11.7Gb/s
Transmission Distance
XFP module: Up to 80Km
SFP+ module: up to 80km
Dimension
Standalone  110(L)*95(W)*326(H)mm
Power requirement
Standalone: DC12V~48V
Power consumption: ≤4W
Environment
Operating Temperature?-40 ~ 85 ? ( – 20~ 60 °F)
Storage Temperature?-40 ~ 85 ? ( – 40 ~ 85 °F)
Ambient Relative Humidity?5 ~ 95% (non-condensing)
Protocols
8.5G Fiber Channel
SONET OC-192, SDH STM-64 (9.95Gbps)
10G WAN (10Gbps)
10G LAN (10.31Gbps)
OTN OTU-2 (G.709) (10.70Gbps)
10G LAN with 255/237 FEC coding (11.09Gbps)
10G Fiber Channel (11.32Gbps)
10G POS

LNGMC-F2F-WSFP+/F2F-WXFP Products properties

Interface

Type A : XFP to XFP
Type B : XFP to SFP+
Type C : SFP+ to XFP
Type D: SFP+ to SFP+
LED Indicator:PWR,SPD, LOS1, LOL2,LOS2, LOL2

Maximum Packet Forwarding Rate

14,880,950/S

Transmission Speed

8.5Gb/s-11.7Gb/s
Transmission Distance

XFP module: Up to 80Km
SFP+ module: up to 80km
Dimension

Standalone ? 110(L)*96.5(W)*35(H)mm
Power requirement
Standalone: DC12V~48V
Power consumption: ≤4W
Environment

Operating Temperature?-40 ~ 85 ? ( – 40 ~ 185 °F)

Storage Temperature?-40 ~ 85 ? ( – 40 ~ 185 °F)

Ambient Relative Humidity?5 ~ 95% (non-condensing)

Protocols

8.5G Fiber Channel
SONET OC-192, SDH STM-64 (9.95Gbps)
10G WAN (10Gbps)
10G LAN (10.31Gbps)
OTN OTU-2 (G.709) (10.70Gbps)
10G LAN with 255/237 FEC coding (11.09Gbps)
10G Fiber Channel (11.32Gbps)
10G POS

LNGMC-S1V-1D-A-EN3-T/RFM WT fiber-optic video transceivers can simultaneously transmit 1 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.

These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.

Plug and Play design ensures the ease of installation and operation.
Electronic and optical adjustments are never required.
LED indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS

1.8-bit digitally encoded and non-compression video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-  422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10��?to 75��?, which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

LNGMC-S4V-1D-A-EN3-T/RFM WT fiber-optic video transceivers can simultaneously transmit 4 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.

These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.

Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required.
LED indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS
1.8-bit digitally encoded and non-compression video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-  422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10��?to 75��?, which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

LNGMC-S8V-1D-A-EN3-T/RFM WT fiber-optic video transceivers can simultaneously transmit 8 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.

These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.
Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required.

LED indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS
1.8-bit digitally encoded and non-compression video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-  422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10��?to 75��?, which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

LNGMC-S16V-1D-A-EN3-T/RFM WT fiber-optic video transceivers can simultaneously transmit 16 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.

These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.
Plug and Play design ensures the ease of installation and operation.

Electronic and optical adjustments are never required.
LED indicators are provided for instantly monitoring system status.

Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS
1.8-bit digitally encoded and non-compression video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-  422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10��?to 75��?, which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

LNGMC-S64V-1D-A-EN3-T/RFM WT fiber-optic video transceivers can simultaneously transmit 64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.
These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.

Plug and Play design ensures the ease of installation and operation.
Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status.
Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

PRODUCT CHARACTERISTICS
1.8-bit digitally encoded and non-compression video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-  422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8.Special ASIC design .
9.Industry-grade of operating temperature from -10��?to 75��?, which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

LNGMC-110GMA-11-05-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GMA-11-2-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-10-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-20-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-40-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-60-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSA-11-80-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-10A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-20A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-40A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

LNGMC-110GSB-11-60A/B-AS  Overview

This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard/IEEE 802.3z 1000Base-TX/FX standard,as well as full duplex and half duplex mode.

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver.
Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

Technical parameters:
1. Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

Seçiminizle eşleşen ürün bulunamadı.

    İletişim & Keşif Formu